Busca: Vicente Gimeno - Clinical Dentistry and Research


Implantology 2010 v04n1

Rui Vicente Oppermann

Implantology 2010 v04n1

Ingressou na UFRGS em 1970, tendo sido o primeiro colocado no concurso vestibular para o curso de Odontologia. Recebeu o Prêmio E. M. Wagner como primeiro aluno da disciplina de Fisiologia. Foi bolsista de iniciação científica no Laboratório de Microbiologia Oral e, posteriormente, na...

Autores: Angelo Menuci,

Ler Artigo
Estética | JCDR 2019 v16n1

| The SEOC gathered in Seville more than 300 professionals of national and international dentistry focused on the field of Conservative and Aesthetic Dentistry

Estética | JCDR 2019 v16n1

T he Spanish Society of Conservative and Aesthetic Dentistry held at the Meliá Lebreros Hotel in Seville, from May 17 to 19, the XXII National and IX International Congress where Conservative and Aesthetic Dentistry was the leading role. This scientific event was chaired by the president of the...

Autores:

Ler Artigo
Estética | JCDR 2018 v15n3

A new use of the mock-up: The intra-orthodontic mock-up as a guide for a minimally invasive restorative treatment

Estética | JCDR 2018 v15n3

Esthetic restorative treatment should begin with a final outlined goal. Mock-up can play a key role not only in guiding the clinician in restorative treatment or dental preparation, but also in the patient’s acceptance of future restorations, especially in cases where changes in shape and/or size...

Autores: Ignacio Faus Matoses, Vicente Faus Matoses, Vicente J. Faus Llácer,

Ler Artigo
Entrevista com Jack Ferracane

Entrevista com Jack Ferracane

Estética | JCDR 2023 v20n1

Jack Ferracane é Professor Titular de Odontologia Restauradora na Oregon Health & Science University (Portland, Oregon/EUA). Ele é bacharel em Biologia pela University of Illinois e mestre e doutor em Materiais Biológicos pela Northwestern University. É membro fundador e ex-presidente da...

Autores: Marcelo Giannini, Vicente Castelo Branco Leitune,

Ler Artigo
An interview with Jack Ferracane

An interview with Jack Ferracane

Estética | JCDR 2023 v20n1

Jack Ferracane is Professor and Chair of Restorative Dentistry at Oregon Health & Science University, Portland, Oregon. He received a B.S. in Biology from the University of Illinois, and an M.S. and Ph.D. in Biological Materials from Northwestern University. He is a founding fellow and...

Autores: Marcelo Giannini, Vicente Castelo Branco Leitune,

Ler Artigo
Implantology 2012 v06n3

Influência na retenção de coroas cimentadas sobre implantes com e sem orifício ao parafuso

Implantology 2012 v06n3

Introdução: na Implantodontia, o mecanismo de retenção da restauração ao intermediário pode ser cimentado ou parafusado. Os cimentados apresentam difícil reversibilidade, entretanto, o uso de um orifício de acesso ao parafuso permitiria tal reversibilidade, aliando o baixo custo dos...

Autores: Mirella Aguiar De Freitas, Paulo Vicente Rocha,

Ler Artigo
Brazilian postgraduate studies in the age of qualitative assessment

Brazilian postgraduate studies in the age of qualitative assessment

Estética | JCDR 2024 v21n3

The evaluation system of Brazilian graduate programs has a history trajectory of nearly 50 years, playing a decisive role in promoting quality and advancing science and graduate education in Brazil. In 2020, Brazil had more than 4,600 Stricto Sensu Graduate Programs, 97 of which were in the...

Autores: Vicente Castelo Branco Leitune, Manoel Damião Sousa-Neto,

Ler Artigo
A pós-graduação brasileira na era da avaliação qualitativa

A pós-graduação brasileira na era da avaliação qualitativa

Estética | JCDR 2024 v21n3

O sistema de avaliação da pós-graduação brasileira possui uma trajetória de quase 50 anos, desempenhando papel decisivo na promoção da qualidade e no desenvolvimento da ciência e pós-graduação brasileiras. Em 2020, o Brasil contava com mais de 4.600 Programas de Pós-Graduação...

Autores: Vicente Castelo Branco Leitune, Manoel Damião Sousa Neto,

Ler Artigo
Estética | JCDR 2020 v17n3

Intraoral scanner versus conventional impression techniques. Patient satisfaction and other patientreported outcomes: a systematic review

Estética | JCDR 2020 v17n3

Objective: Intraoral scanner impressions are already present for many clinicians. The positive and pleasant patients experience takes special relevance in contemporary dentistry. The purpose of this systematic review was to analyze whether there are any differences in relation to comfort,...

Autores: Sidney Kina, Jon Salazar, Ana Boquete Castro, Vicente Gimeno,

Ler Artigo
Estética | JCDR 2018 v15n3

Adhesive strategies to prevent degradation of adhesive/ dentin interface: literature review

Estética | JCDR 2018 v15n3

The main purpose of this review was to evaluate different strategies that have been developed to prevent bond interface degradation over time. Studies evaluating the degradation of dentin-bonding interfaces were identified. The search was restricted to articles written in English between January...

Autores: Vicente Castelo Branco Leitune, Fabrício Mezzomo Collares, Stéfani Becker Rodrigues,

Ler Artigo
Estética | JCDR 2011 v08n4

Qual a substância e a respectiva concentração que você prefere indicar na técnica de clareamento em consultório para dentes vitais?

Estética | JCDR 2011 v08n4

Com o avanço da Odontologia adesiva e da prevenção da cárie dentária, os tratamentos minimamente invasivos passaram a ser rotina para uma grande parcela dos profissionais que se preocupam com a melhoria das condições de saúde bucal dos seus pacientes. Dessa forma, o clareamento dentário...

Autores: Andréa De Azevedo Brito Conceição, Claudio Heliomar Vicente Da Silva,

Ler Artigo
Avaliação da resistência de união de uma resina acrílica CAD/CAM em dentes artificiais de acrílico

Avaliação da resistência de união de uma resina acrílica CAD/CAM em dentes artificiais de acrílico

Estética | JCDR 2023 v20n2

Objetivo: Avaliar a resistência de união à microtração de uma resina acrílica pré-polimerizada, utilizada em sistemas CAD/CAM, para colagem de dentes artificiais de resina acrílica. Métodos: 24 dentes molares artificiais foram divididos em quatro grupos (n=6), de acordo com a resina...

Autores: Vicente Castelo Branco Leitune, Fabrício Mezzomo Collares, Germán Puig, Guillermo Grazioli,

Ler Artigo
Evaluation of microtensile bond strength between CAD/CAM denture resin and acrylic artificial teeth

Evaluation of microtensile bond strength between CAD/CAM denture resin and acrylic artificial teeth

Estética | JCDR 2023 v20n2

Objective: To evaluate the microtensile bond strength of two PMMA acrylic resins used in removable denture bases to artificial acrylic resin teeth: a pre-polymerized acrylic resin used in CAD/ CAM systems. Methods: Twenty-four artificial molars were divided into four groups (n=6) according to...

Autores: Vicente Castelo Branco Leitune, Fabrício Mezzomo Collares, Germán Puig, Guillermo Grazioli,

Ler Artigo
Implantology 2010 v04n4

Reabilitação oral em pacientes periodontais: seriam os implantes a melhor solução?

Implantology 2010 v04n4

A solução reabilitadora ideal a ser escolhida quando o paciente sofre de doença periodontal avançada sempre foi um dilema na Odontologia. O tratamento somente da doença periodontal não restabelece ao indivíduo sua estética e função satisfatórias. A capacidade biológica dos dentes...

Autores: Raquel Vicente Lopes, William Meirelles Frossard, Ângela Maria Vidal Moreira, Ricardo Carvalhaes Fraga,

Ler Artigo
Estética | JCDR 2009 v06n2

Influência da desproteinização e de diferentes tempos de difusão do sistema adesivo sobre a resistência de união resina/dentina: estudo piloto

Estética | JCDR 2009 v06n2

O propósito deste estudo foi avaliar a influência da desproteinização e de diferentes tempos de difusão do sistema adesivo na resistência de união por microtração entre resina e dentina. Oito terceiros molares foram seccionados horizontalmente e separados aleatoriamente em 4 grupos: PB...

Autores: Aloísio Oro Spazzin, Daniel Galafassi, Marcelo Ferraz Mesquita, Bruno Carlini Jr., Vicente De Paulo Aragão Saboia,

Ler Artigo
Estética | JCDR 2022 v19n2

Degree of conversion of 3D printed dental casts: effect of different printing parameters

Estética | JCDR 2022 v19n2

Introduction: This study aimed to evaluate the influence of different layer thicknesses, orientation angles, and post-polymerization on the degree of conversion of a 3D printing resin to dental casts. Methods: 3D printing was performed with a 405 nm digital light processing printer (DLP)...

Autores: Vicente Castelo Branco Leitune, Fabrício Mezzomo Collares, Giovan Mateus Balbueno GUERREIRO, Gabriela de Souza BALBINOT, Alvaro Della Bona,

Ler Artigo
Estética | JCDR 2018 v15n3

In vitro microhardness evaluation of bulk fill resins after six months of water storage

Estética | JCDR 2018 v15n3

Introduction: Bulk-fill resin composites reduce clinical time of a restoration because they can be cured at larger increments (4 to 5 mm) than conventional composites. This study determined the Knoop microhardness of bulk-fill and conventional composites at 24 hours and 180 days after storage in a...

Autores: Marcos Alexandre Fadanelli, Simone Maria Bonfanti Henkes, Almir José Henkes, Fernanda Zanella Arruda, Vicente Castelo Branco Leitune, Fabrício Mezzomo Collares,

Ler Artigo
Diferentes designs de término para restaurações indiretas parciais: comportamento mecânico e adaptação in vitro

Diferentes designs de término para restaurações indiretas parciais: comportamento mecânico e adaptação in vitro

Estética | JCDR 2024 v21n1

Objetivo: O objetivo desse estudo foi avaliar in vitro a influência do término do preparo na adaptação e comportamento mecânico de restaurações parciais indiretas de resina composta. Métodos: Quarenta e cinco pré-molares superiores extraídos foram preparados para receber restaurações...

Autores: Juan Carlos Pontons Melo, Vicente Castelo Branco Leitune, Fabrício Mezzomo Collares, Gabriela de Souza BALBINOT, Gustavo Huertas Mogollón, Gustavo Watanabe Oshiro, Sara Fraga,

Ler Artigo
Different designs of finishing line for partial indirect restorations: mechanical behavior and adaptation in vitro

Different designs of finishing line for partial indirect restorations: mechanical behavior and adaptation in vitro

Estética | JCDR 2024 v21n1

Objective: This study aimed to evaluatethe influence of finishing linesin the adaptation and mechanicalbehavior of partial indirect occlusalrestorations in vitro. Materials andmethods: Forty-five extracted humanmaxillary premolars were prepared toreceive resin composite partial coverageindirect...

Autores: Juan Carlos Pontons Melo, Vicente Castelo Branco Leitune, Fabrício Mezzomo Collares, Gabriela de Souza BALBINOT, Gustavo Huertas Mogollón, Gustavo Watanabe Oshiro, Sara Fraga,

Ler Artigo

Copyright © 1998 - 2022 DentalGO | Todos Direitos Reservados. DentalGO é uma marca Dental Press